Service Hotline
0760-22581058
No. 29, Liansheng South Road, Lianfeng Industrial
Zone, Xiaolan Town, Zhongshan, Guangdong, China
fax：0760-22581078
e-mail：xintai@xtjx88.com
Copyright(c) 2018 Zhongshan Xintai Automation Equipment Co., Ltd . 粤ICP备14015524号 Website:WWW.300.CN ZhongShan
PRODUCTS
产品名称
XT-1517-32A-XL catenary automatic sand blasting machine
产品描述
Xintai XT1517-32A suspended automatic sand blasting machine parameters:
Overall dimensions: 3600mm*1350mm*3100mm (length*width*height)
Mainframe dimensions: 3000mm*1200mm*2200mm (length*width*height)
Outer spray area size: 1200mm*800mm*350mm (length*width*height)
Dust box outer dimensions: 1100mm*1200mm*2600mm (length * width * height)
Steel plate thickness: 2.5-6mm low carbon wear-resistant steel plate, external electrostatic spray treatment.
Spray gun specifications: (20 * 8 * 60mm) 32 pieces Xin Tai special wear-resistant spray gun
Conveying speed: 0-3 m / min (Intelligent frequency control)
Conveying motor: 380V/50HZ/200W
Swing speed: 0-60 rev / min (Intelligent frequency control)
Conveying motor: 380V/50HZ/200W
Dust removal motor: 380V/50HZ/ 5.5KW
Air source requirements: pressure 2-7bar (kg/cm2)
Compressed flow: 8-12m3/min
Total equipment volume: 15m3
Total machine weight: 1300KG
Total machine power: 380V/50HZ/ 7.5KW
Main use of automatic sand blasting machine
1. The automatic sand blasting machine is mainly used for cleaning and strengthening the outer surface of the workpiece;
2. Surface cleaning and reoxidation treatment of hardware products such as mobile phone casings;
3. Surface cleaning of parts before electroplating and painting;
4. Remove contaminants from surfaces such as barrels, tubes, trays, cans, and utensils;
5. Cleaning of tools, molds, pipes, plates and operating parts;
6. Surface cleaning of glass molds, rubber molds, metal castings and extrusions;
7. Various workpiece surface weld trimming;
8. Pre-glaze treatment on the surface of workpieces such as ceramics;
9. Remove the oxide scale on the surface of the workpiece and remove the chromatic aberration (castings, forgings) after the processing;
10. Clean up large turbines, engine castings or complex small parts;
11. Cleaning and descaling of parts (such as cylinder block, piston and spark plug) during engine repair;
12. Surfaces of bakelite products, contactors and wiring, etc., to improve electrical conductivity;
13. Cleaning and preservation of crafts and other works of art;
14. Remove old paint and dirt from the surface of various workpieces.
Previous article
XT-1718-12A-lx-Continuous automatic sand blasting machine
XT-1115-12B-ss acrylic conveying sand blasting machine
Next article